PartsTable
Technical Data Sheet
Download PDF

L8830810 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L8830810: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_length: 2.750 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 3.630 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-341-4787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L8830810
NSN: 5340-01-341-4787
FSC: 5340 — Hardware, Commercial
CAGE: 25685 — NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIVISION SUBMARINE ANTENNA QUALITY ASSURANCE (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_length2.750 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length3.630 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_thickness0.440 INCHES NOMINAL IN
second_leg_thickness0.760 INCHES NOMINAL IN
first_leg_hole_diameter0.410 INCHES NOMINAL IN
first_leg_hole_arrangement_styleFOUR HOLES
second_leg_relationship_to_first_legNOT IDENTICAL
NSN5340-01-341-4787
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L8830810 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.440 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.410 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG LENGTH: 3.630 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: FOUR HOLES
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: CORNER RADIUS
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.440 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.410 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG LENGTH3.630 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEFOUR HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLECORNER RADIUS
SECOND LEG THICKNESS0.760 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.440 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 4
516 5361686 REV-ITEM 10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5361686 ITEM 10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6640211 FIND 10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5361686 FIND 10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L8830810?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L8830810?
L8830810 is a BRACKET,ANGLE.
What parts can replace L8830810?
There are 4 known substitutes for L8830810: 516 5361686 REV-ITEM 10, 5361686 ITEM 10, 6640211 FIND 10 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L8830810?
L8830810 is cataloged in the U.S. Government catalog under NSN 5340-01-341-4787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L8830810