PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L750-12
L750-12 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.8750 INCHES NOMINAL IN, cone_width: 1.1450 INCHES NOMINAL IN, bore_diameter: 1.3750 INCHES NOMINAL IN, overall_width: 1.0625 INCHES NOMINAL IN, standout_width: 0.1875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3902, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L750-12
NSN: 3110-00-100-3902
FSC: 3110
CAGE: 71684 — CONVEYOR CO THE
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.8750 INCHES NOMINAL IN
cone_width1.1450 INCHES NOMINAL IN
bore_diameter1.3750 INCHES NOMINAL IN
overall_width1.0625 INCHES NOMINAL IN
standout_width0.1875 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0310 INCHES NOMINAL IN
backface_corner_radius0.0620 INCHES NOMINAL IN
overall_outside_diameter3.4843 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-3902
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L750-12 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.8750 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 1.1450 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.1875 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 3.4843 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 1.3750 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CUP WIDTH0.8750 INCHES NOMINAL IN
CONE CORNER RADIUS0.0310 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH1.1450 INCHES NOMINAL IN
STANDOUT WIDTH0.1875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER3.4843 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BORE DIAMETER1.3750 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH1.0625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
60908-2Interchangeable
interchangeable cross-reference
interchangeable
260727Interchangeable
interchangeable cross-reference
interchangeable
FLEXTRA2INX36INInterchangeable
interchangeable cross-reference
interchangeable
624VLH00155Interchangeable
interchangeable cross-reference
interchangeable
32SWInterchangeable
interchangeable cross-reference
interchangeable
417414Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L750-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L750-12?
L750-12 is a BEARING,ROLLER,TAPERED.
What parts can replace L750-12?
There are 10 known substitutes for L750-12: 60908-2, 260727, FLEXTRA2INX36IN and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L750-12?
L750-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L750-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026