PartsTable
Technical Data Sheet
Download PDF

L6312120-029 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

L6312120-029: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.046 INCHES NOMINAL IN, diameter: 0.183 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, material: STEEL COMP XM-13 OVERALL, head_style: FLAT, chamfer_length: 0.046 INCHES NOMINAL IN, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-177-9859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L6312120-029
NSN: 5315-01-177-9859
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
height0.046 INCHES NOMINAL IN
diameter0.183 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT
chamfer_length0.046 INCHES NOMINAL IN
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER
style_designatorSTRAIGHT
pin_chamfer_angle14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
pin_head_diameter0.312 INCHES NOMINAL IN
under_head_length0.988 INCHES NOMINAL IN
first_hole_diameter0.076 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
NSN5315-01-177-9859
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: L6312120-029 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER
•
CHAMFER LENGTH: 0.046 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.988 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.076 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER
CHAMFER LENGTH0.046 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.988 INCHES NOMINAL IN
PIN CHAMFER ANGLE14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.076 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.312 INCHES NOMINAL IN
DIAMETER0.183 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
HEAD STYLEFLAT
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L6312120-029?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L6312120-029?
L6312120-029 is a PIN,STRAIGHT,HEADED.
What is the NSN for L6312120-029?
L6312120-029 is cataloged in the U.S. Government catalog under NSN 5315-01-177-9859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L6312120-029

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.