PartsTable
Technical Data Sheet
Download PDF

L6310016-017 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L6310016-017: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include thread_class: 3B ROD CONNECTION, hole_diameter: 0.686 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN, overall_width: 1.105 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN, shank_diameter: 1.390 INCHES NOMINAL IN, fork_span_width: 0.395 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, overall_diameter: 1.640 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-275-0916, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L6310016-017
NSN: 5340-01-275-0916
FSC: 5340 — Hardware, Commercial
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
thread_class3B ROD CONNECTION
hole_diameter0.686 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
overall_width1.105 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN
shank_diameter1.390 INCHES NOMINAL IN
fork_span_width0.395 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
overall_diameter1.640 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.355 INCHES NOMINAL IN
nominal_thread_size0.4375 INCHES ROD CONNECTION IN
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION
distance_from_pivot_pinhole_center_to_rod_connection_end2.260 INCHES NOMINAL IN
NSN5340-01-275-0916
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L6310016-017 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.390 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.395 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.355 INCHES NOMINAL IN
•
OVERALL DIAMETER: 1.640 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.4375 INCHES ROD CONNECTION IN
•
THREAD CLASS: 3B ROD CONNECTION
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.390 INCHES NOMINAL IN
FORK SPAN WIDTH0.395 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
FORK ARM THICKNESS0.355 INCHES NOMINAL IN
OVERALL DIAMETER1.640 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN
OVERALL WIDTH1.105 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.4375 INCHES ROD CONNECTION IN
THREAD CLASS3B ROD CONNECTION
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION
HOLE DIAMETER0.686 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy L6310016-017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L6310016-017?
L6310016-017 is a CLEVIS,ROD END.
What is the NSN for L6310016-017?
L6310016-017 is cataloged in the U.S. Government catalog under NSN 5340-01-275-0916. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L6310016-017