PartsTable
Technical Data Sheet
Download PDF

L5873413-001 — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

L5873413-001: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, shank_style: HOLLOW, bore_diameter: 0.2365 INCHES NOMINAL IN, alignment_type: RIGID, overall_length: 1.9935 INCHES NOMINAL IN, shank_diameter: 0.4360 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-194-4256, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L5873413-001
NSN: 3110-01-194-4256
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R56400 OVERALL
shank_styleHOLLOW
bore_diameter0.2365 INCHES NOMINAL IN
alignment_typeRIGID
overall_length1.9935 INCHES NOMINAL IN
shank_diameter0.4360 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
inner_ring_width0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
outer_ring_width0.2240 INCHES MINIMUM AND 0.2340 INCHES MAXIMUM IN
shank_bore_depth0.7200 INCHES NOMINAL IN
style_designatorSINGLE ROW, BALL
shank_bore_diameter0.2040 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM IN
end_item_identificationB-1B ACFT
NSN3110-01-194-4256
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L5873413-001 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.4360 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
•
OUTER RING WIDTH: 0.2240 INCHES MINIMUM AND 0.2340 INCHES MAXIMUM IN
•
SHANK BORE DEPTH: 0.7200 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE ROW, BALL
•
SHANK BORE DIAMETER: 0.2040 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 0.9370 INCHES NOMINAL IN
•
SHANK STYLE: HOLLOW
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.4360 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
OUTER RING WIDTH0.2240 INCHES MINIMUM AND 0.2340 INCHES MAXIMUM IN
SHANK BORE DEPTH0.7200 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE ROW, BALL
OVERALL LENGTH1.9935 INCHES NOMINAL IN
SHANK BORE DIAMETER0.2040 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.9370 INCHES NOMINAL IN
SHANK STYLEHOLLOW
ALIGNMENT TYPERIGID
END ITEM IDENTIFICATIONB-1B ACFT
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L5873413-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L5873413-001?
L5873413-001 is a BEARING,BALL,ROD END.
What is the NSN for L5873413-001?
L5873413-001 is cataloged in the U.S. Government catalog under NSN 3110-01-194-4256. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L5873413-001