PartsTable
Technical Data Sheet
Download PDF

L555249V-2-397 — CONE,TAPERED ROLLER BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

L555249V-2-397: CONE,TAPERED ROLLER BEARING.

The CONE,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cone_width: 1.8750 INCHES NOMINAL IN, bore_diameter: 11.5000 INCHES MINIMUM AND 11.5010 INCHES MAXIMUM IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1400 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-139-5433, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L555249V-2-397
NSN: 3110-01-139-5433
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.8750 INCHES NOMINAL IN
bore_diameter11.5000 INCHES MINIMUM AND 11.5010 INCHES MAXIMUM IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-01-139-5433
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L555249V-2-397 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
CONE WIDTH: 1.8750 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 11.5000 INCHES MINIMUM AND 11.5010 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
CONE WIDTH1.8750 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER11.5000 INCHES MINIMUM AND 11.5010 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
SB3613-101Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy L555249V-2-397?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L555249V-2-397?
L555249V-2-397 is a CONE,TAPERED ROLLER BEARING.
What parts can replace L555249V-2-397?
There is 1 known substitute for L555249V-2-397: SB3613-101. Substitute compatibility should be verified for your specific system.
What is the NSN for L555249V-2-397?
L555249V-2-397 is cataloged in the U.S. Government catalog under NSN 3110-01-139-5433. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L555249V-2-397