PartsTable
Technical Data Sheet
Download PDF

L432349XX2-397 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

L432349XX2-397: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.9375 INCHES NOMINAL IN, bore_diameter: 6.2500 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0620 INCHES NOMINAL IN, retainer_fabrication_method: PRESSED. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-944-6336, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L432349XX2-397
NSN: 3110-00-944-6336
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.9375 INCHES NOMINAL IN
bore_diameter6.2500 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0620 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-944-6336
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L432349XX2-397 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
CONE WIDTH: 0.9375 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 6.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0620 INCHES NOMINAL IN
CONE WIDTH0.9375 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER6.2500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
1432349XX2-397Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SB3605A1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy L432349XX2-397?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L432349XX2-397?
L432349XX2-397 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace L432349XX2-397?
There are 2 known substitutes for L432349XX2-397: 1432349XX2-397, SB3605A1. Substitute compatibility should be verified for your specific system.
What is the NSN for L432349XX2-397?
L432349XX2-397 is cataloged in the U.S. Government catalog under NSN 3110-00-944-6336. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L432349XX2-397