PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L35592
L35592 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.5625 INCHES NOMINAL IN, cone_width: 0.7940 INCHES NOMINAL IN, bore_diameter: 0.8750 INCHES NOMINAL IN, overall_width: 0.7940 INCHES NOMINAL IN, standout_width: 0.2000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-4443, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L35592
NSN: 3110-00-100-4443
FSC: 3110
CAGE: 31634 — OVERTON CHICAGO GEAR CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.5625 INCHES NOMINAL IN
cone_width0.7940 INCHES NOMINAL IN
bore_diameter0.8750 INCHES NOMINAL IN
overall_width0.7940 INCHES NOMINAL IN
standout_width0.2000 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0620 INCHES NOMINAL IN
backface_corner_radius0.0620 INCHES NOMINAL IN
overall_outside_diameter2.0625 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-4443
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L35592 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.8750 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.2000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
CUP WIDTH: 0.5625 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.8750 INCHES NOMINAL IN
STANDOUT WIDTH0.2000 INCHES NOMINAL IN
OVERALL WIDTH0.7940 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
CUP WIDTH0.5625 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CONE CORNER RADIUS0.0620 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.0625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
2-544-1Interchangeable
interchangeable cross-reference
interchangeable
AH052SInterchangeable
interchangeable cross-reference
interchangeable
21850Interchangeable
interchangeable cross-reference
interchangeable
0781-060-208Interchangeable
interchangeable cross-reference
interchangeable
M1195Interchangeable
interchangeable cross-reference
interchangeable
5350845Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L35592?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L35592?
L35592 is a BEARING,ROLLER,TAPERED.
What parts can replace L35592?
There are 20 known substitutes for L35592: 2-544-1, AH052S, 21850 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L35592?
L35592 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-4443. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L35592

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026