PartsTable
Technical Data Sheet
Download PDF

L35389 — WASHER,SHOULDERED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

L35389: WASHER,SHOULDERED.

The WASHER,SHOULDERED is a the manufacturer industrial component. Key specifications include material: STEEL OR STEEL COMP 1213 OVERALL, hole_diameter: 1.250 INCHES NOMINAL IN, shoulder_height: 0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN, outside_diameter: 1.750 INCHES NOMINAL IN, style_designator: SHOULDERED, shoulder_diameter: 1.505 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-204-3357, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L35389
NSN: 5310-01-204-3357
FSC: 5310 — Nuts and Washers
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OR STEEL COMP 1213 OVERALL
hole_diameter1.250 INCHES NOMINAL IN
shoulder_height0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
outside_diameter1.750 INCHES NOMINAL IN
style_designatorSHOULDERED
shoulder_diameter1.505 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
material_thickness0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
NSN5310-01-204-3357
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: L35389 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER HEIGHT: 0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SHOULDERED
•
OUTSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
SHOULDER DIAMETER: 1.505 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
•
MATERIAL: STEEL OR STEEL COMP 1213 OVERALL
•
HOLE DIAMETER: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHOULDER HEIGHT0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
STYLE DESIGNATORSHOULDERED
OUTSIDE DIAMETER1.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
SHOULDER DIAMETER1.505 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
MATERIALSTEEL OR STEEL COMP 1213 OVERALL
HOLE DIAMETER1.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
725024Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L35389?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L35389?
L35389 is a WASHER,SHOULDERED.
What parts can replace L35389?
There is 1 known substitute for L35389: 725024. Substitute compatibility should be verified for your specific system.
What is the NSN for L35389?
L35389 is cataloged in the U.S. Government catalog under NSN 5310-01-204-3357. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L35389

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.