PartsTable
Technical Data Sheet
Download PDF

L33761 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

L33761: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, thickness: 0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, hole_diameter: 1.250 INCHES NOMINAL IN, overall_diameter: 1.750 INCHES NOMINAL IN, features_provided: MAGNETIZED, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-061-9073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L33761
NSN: 5310-01-061-9073
FSC: 5310 — Nuts and Washers
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
thickness0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
hole_diameter1.250 INCHES NOMINAL IN
overall_diameter1.750 INCHES NOMINAL IN
features_providedMAGNETIZED
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-061-9073
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: L33761 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
FEATURES PROVIDED: MAGNETIZED
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 1.250 INCHES NOMINAL IN
•
THICKNESS: 0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
FEATURES PROVIDEDMAGNETIZED
PERIPHERAL SHAPE STYLEROUND
MATERIALALUMINUM ALLOY 2024 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.250 INCHES NOMINAL IN
THICKNESS0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
715014Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L33761?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L33761?
L33761 is a WASHER,FLAT.
What parts can replace L33761?
There is 1 known substitute for L33761: 715014. Substitute compatibility should be verified for your specific system.
What is the NSN for L33761?
L33761 is cataloged in the U.S. Government catalog under NSN 5310-01-061-9073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L33761

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.