PartsTable
Technical Data Sheet
Download PDF

L33518 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L33518: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 135.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 25.0 MILLIMETERS NOMINAL MM, first_leg_length: 39.0 MILLIMETERS NOMINAL MM, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-240-0879, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L33518
NSN: 5340-01-240-0879
FSC: 5340 — Hardware, Commercial
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle135.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width25.0 MILLIMETERS NOMINAL MM
first_leg_length39.0 MILLIMETERS NOMINAL MM
second_leg_styleSQUARE
second_leg_width25.0 MILLIMETERS NOMINAL MM
style_designatorANGLE
second_leg_length51.0 MILLIMETERS NOMINAL MM
mounting_hole_typePLAIN
first_leg_thickness3.0 MILLIMETERS NOMINAL MM
second_leg_thickness3.0 MILLIMETERS NOMINAL MM
NSN5340-01-240-0879
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L33518 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 20.0 MILLIMETERS MINIMUM AND 22.0 MILLIMETERS MAXIMUM MM
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 19.0 MILLIMETERS NOMINAL MM
•
FIRST LEG HOLE DIAMETER: 15.0 MILLIMETERS NOMINAL MM
•
FIRST LEG ANGLE: 135.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 10.50 MILLIMETERS NOMINAL MM
•
SECOND LEG WIDTH: 25.0 MILLIMETERS NOMINAL MM
•
SECOND LEG LENGTH: 51.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH20.0 MILLIMETERS MINIMUM AND 22.0 MILLIMETERS MAXIMUM MM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH19.0 MILLIMETERS NOMINAL MM
FIRST LEG HOLE DIAMETER15.0 MILLIMETERS NOMINAL MM
FIRST LEG ANGLE135.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER10.50 MILLIMETERS NOMINAL MM
SECOND LEG WIDTH25.0 MILLIMETERS NOMINAL MM
SECOND LEG LENGTH51.0 MILLIMETERS NOMINAL MM
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH12.5 MILLIMETERS NOMINAL MM
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L33518?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L33518?
L33518 is a BRACKET,ANGLE.
What is the NSN for L33518?
L33518 is cataloged in the U.S. Government catalog under NSN 5340-01-240-0879. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L33518

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.