PartsTable
Technical Data Sheet
Download PDF

L33022 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

L33022: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: HEXAGON, grip_length: 1.803 INCHES MINIMUM AND 1.823 INCHES MAXIMUM IN, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-955-5642, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L33022
NSN: 5306-00-955-5642
FSC: 5306 — Bolts
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleHEXAGON
grip_length1.803 INCHES MINIMUM AND 1.823 INCHES MAXIMUM IN
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class3A A
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity1
thread_length0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
fastener_length2.719 INCHES MINIMUM AND 2.781 INCHES MAXIMUM IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
NSN5306-00-955-5642
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: L33022 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.719 INCHES MINIMUM AND 2.781 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
HOLE CONFIGURATION STYLE: HEXAGON LONGITUDINAL HOLE
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
FASTENER LENGTH2.719 INCHES MINIMUM AND 2.781 INCHES MAXIMUM IN
THREAD LENGTH0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HOLE CONFIGURATION STYLEHEXAGON LONGITUDINAL HOLE
NOMINAL THREAD DIAMETER0.500 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.803 INCHES MINIMUM AND 1.823 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
106880Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L33022?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L33022?
L33022 is a BOLT,MACHINE.
What parts can replace L33022?
There is 1 known substitute for L33022: 106880. Substitute compatibility should be verified for your specific system.
What is the NSN for L33022?
L33022 is cataloged in the U.S. Government catalog under NSN 5306-00-955-5642. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L33022