PartsTable
Technical Data Sheet
Download PDF

L31081 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L31081: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.410 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.550 INCHES NOMINAL IN, overall_length: 7.960 INCHES NOMINAL IN, bolt_hole_quantity: 10, cross-sectional_thickness: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-932-0864, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L31081
NSN: 5330-00-932-0864
FSC: 5330 — Packing and Gasket Materials
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
hole_diameter0.410 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.550 INCHES NOMINAL IN
overall_length7.960 INCHES NOMINAL IN
bolt_hole_quantity10
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
NSN5330-00-932-0864
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L31081 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 10
•
HOLE DIAMETER: 0.410 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
OVERALL LENGTH7.960 INCHES NOMINAL IN
OVERALL WIDTH6.550 INCHES NOMINAL IN
BOLT HOLE QUANTITY10
HOLE DIAMETER0.410 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
6777316Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
659287Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy L31081?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L31081?
L31081 is a GASKET.
What parts can replace L31081?
There are 2 known substitutes for L31081: 6777316, 659287. Substitute compatibility should be verified for your specific system.
What is the NSN for L31081?
L31081 is cataloged in the U.S. Government catalog under NSN 5330-00-932-0864. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L31081