L305649XX-2-397 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

L305649XX-2-397: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.7188 INCHES NOMINAL IN, bore_diameter: 2.0000 INCHES MINIMUM AND 2.0005 INCHES MAXIMUM IN, special_features: STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0600 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-084-2532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

L305649XX-2-397

NSN: 3110-01-084-2532
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)

SPECIFICATIONS

material	STEEL OVERALL
cone_width	0.7188 INCHES NOMINAL IN
bore_diameter	2.0000 INCHES MINIMUM AND 2.0005 INCHES MAXIMUM IN
special_features	STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F
style_designator	NORMAL ANGLE
cone_corner_radius	0.0600 INCHES NOMINAL IN
standard_tolerance_designation	AFBMA CLASS 2
NSN	3110-01-084-2532

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: NORMAL ANGLE

•

CONE CORNER RADIUS: 0.0600 INCHES NOMINAL IN

•

CONE WIDTH: 0.7188 INCHES NOMINAL IN

•

TEST DATA DOCUMENT: 78286-SB3217-101 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

•

STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2

•

BORE DIAMETER: 2.0000 INCHES MINIMUM AND 2.0005 INCHES MAXIMUM IN

•

MATERIAL: STEEL OVERALL

TYPICAL APPLICATIONS

Long-term data archival and compliance retention
Offsite backup and disaster recovery
Air-gapped ransomware protection
Cold storage tier for infrequently accessed data

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	NORMAL ANGLE
CONE CORNER RADIUS	0.0600 INCHES NOMINAL IN
CONE WIDTH	0.7188 INCHES NOMINAL IN
SPECIAL FEATURES	STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F
TEST DATA DOCUMENT	78286-SB3217-101 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
STANDARD TOLERANCE DESIGNATION	AFBMA CLASS 2
BORE DIAMETER	2.0000 INCHES MINIMUM AND 2.0005 INCHES MAXIMUM IN
MATERIAL	STEEL OVERALL

OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722

SUBSTITUTES & CROSS-REFERENCES 1

SB3217-101Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Demilitarization required — critical (Q)

Ready to buy L305649XX-2-397?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is L305649XX-2-397?

L305649XX-2-397 is a CONE AND ROLLERS,TAPERED ROLLER.

What parts can replace L305649XX-2-397?

There is 1 known substitute for L305649XX-2-397: SB3217-101. Substitute compatibility should be verified for your specific system.

What is the NSN for L305649XX-2-397?

L305649XX-2-397 is cataloged in the U.S. Government catalog under NSN 3110-01-084-2532. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

L305649XX-2-397 — CONE AND ROLLERS,TAPERED ROLLER

Request a Quote — L305649XX-2-397