PartsTable
Technical Data Sheet
Download PDF

L3006-112 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L3006-112: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, outside_diameter: 1.500 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.300 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-070-1977, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L3006-112
NSN: 5330-00-070-1977
NIINs: 000701977, 010280102
FSC: 5330 — Packing and Gasket Materials
CAGE: 54845 — HOIST LIFTRUCK MFG INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter1.500 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.300 INCHES NOMINAL IN
peripheral_diameter1.500 INCHES NOMINAL IN
center_hole_diameter1.293 INCHES MINIMUM AND 1.305 INCHES MAXIMUM IN
cross-sectional_height0.094 INCHES NOMINAL IN
maximum_pressure_rating2000.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.094 INCHES NOMINAL IN
cross-sectional_shape_styleOVAL
NSN5330-00-070-1977
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L3006-112 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 2000.0 POUNDS PER SQUARE INCH (PSI) LBS
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.300 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL THICKNESS0.094 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING2000.0 POUNDS PER SQUARE INCH (PSI) LBS
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER1.500 INCHES NOMINAL IN
APERTURE DIAMETER1.300 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
D26819Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L3006-112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L3006-112?
L3006-112 is a GASKET.
What parts can replace L3006-112?
There is 1 known substitute for L3006-112: D26819. Substitute compatibility should be verified for your specific system.
What is the NSN for L3006-112?
L3006-112 is cataloged in the U.S. Government catalog under NSN 5330-00-070-1977. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L3006-112

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.