PartsTable
Technical Data Sheet
Download PDF

L3-1420240 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L3-1420240: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, loop_inside_diameter: 1.500 INCHES NOMINAL IN, end_item_identification: 2330-017078546, part_name_assigned_by_controlling_agency: LOOM CLAMP,1-1/2" I.D. X 1/2" W,304 S/S.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-725-4093, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L3-1420240
NSN: 5340-01-725-4093
FSC: 5340 — Hardware, Commercial
CAGE: 880W5 — CERTIFIED STAINLESS SERVICE, INC. DBA WEST-MARK DIV WEST-MARK (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
loop_inside_diameter1.500 INCHES NOMINAL IN
end_item_identification2330-017078546
part_name_assigned_by_controlling_agencyLOOM CLAMP,1-1/2" I.D. X 1/2" W,304 S/S
NSN5340-01-725-4093
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L3-1420240 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: STEEL COMP 304 OVERALL
•
LOOP INSIDE DIAMETER: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.500 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYLOOM CLAMP,1-1/2" I.D. X 1/2" W,304 S/S
END ITEM IDENTIFICATION2330-017078546
MATERIALSTEEL COMP 304 OVERALL
LOOP INSIDE DIAMETER1.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L3-1420240?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L3-1420240?
L3-1420240 is a CLAMP,LOOP.
What is the NSN for L3-1420240?
L3-1420240 is cataloged in the U.S. Government catalog under NSN 5340-01-725-4093. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L3-1420240