PartsTable
Technical Data Sheet
Download PDF

L225842V-2-397 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

L225842V-2-397: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL CAGE, cup_width: 0.8125 INCHES NOMINAL IN, cone_width: 1.0313 INCHES NOMINAL IN, bore_diameter: 4.7500 INCHES NOMINAL IN, overall_width: 1.0000 INCHES MINIMUM AND 1.0080 INCHES MAXIMUM IN, standout_width: 0.0313 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-266-0893, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L225842V-2-397
NSN: 3110-01-266-0893
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CAGE
cup_width0.8125 INCHES NOMINAL IN
cone_width1.0313 INCHES NOMINAL IN
bore_diameter4.7500 INCHES NOMINAL IN
overall_width1.0000 INCHES MINIMUM AND 1.0080 INCHES MAXIMUM IN
standout_width0.0313 INCHES NOMINAL IN
style_designatorRIB RING, STRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0600 INCHES NOMINAL IN
backface_corner_radius0.0600 INCHES NOMINAL IN
overall_outside_diameter6.6875 INCHES MINIMUM AND 6.6885 INCHES MAXIMUM IN
material_document_and_classificationL225842XX2397,FSCM 60038 MFR REF SINGLE MATERIAL RESPONSE CAGE
NSN3110-01-266-0893
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L225842V-2-397 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.8125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIB RING, STRAIGHT BORE, NORMAL ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: L225842XX2397,FSCM 60038 MFR REF SINGLE MATERIAL RESPONSE CAGE
•
OVERALL OUTSIDE DIAMETER: 6.6875 INCHES MINIMUM AND 6.6885 INCHES MAXIMUM IN
•
BACKFACE CORNER RADIUS: 0.0600 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0600 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.0313 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH0.8125 INCHES NOMINAL IN
STYLE DESIGNATORRIB RING, STRAIGHT BORE, NORMAL ANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONL225842XX2397,FSCM 60038 MFR REF SINGLE MATERIAL RESPONSE CAGE
OVERALL WIDTH1.0000 INCHES MINIMUM AND 1.0080 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER6.6875 INCHES MINIMUM AND 6.6885 INCHES MAXIMUM IN
BACKFACE CORNER RADIUS0.0600 INCHES NOMINAL IN
CONE CORNER RADIUS0.0600 INCHES NOMINAL IN
STANDOUT WIDTH0.0313 INCHES NOMINAL IN
CONE WIDTH1.0313 INCHES NOMINAL IN
BORE DIAMETER4.7500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
SB3504-102Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy L225842V-2-397?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L225842V-2-397?
L225842V-2-397 is a BEARING,ROLLER,TAPERED.
What parts can replace L225842V-2-397?
There is 1 known substitute for L225842V-2-397: SB3504-102. Substitute compatibility should be verified for your specific system.
What is the NSN for L225842V-2-397?
L225842V-2-397 is cataloged in the U.S. Government catalog under NSN 3110-01-266-0893. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L225842V-2-397

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.