PartsTable
Technical Data Sheet
Download PDF

L217810XX-2-397 — CUP,TAPERED ROLLER BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

L217810XX-2-397: CUP,TAPERED ROLLER BEARING.

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL COMP M50 OVERALL, overall_width: 0.8125 INCHES MINIMUM AND 0.8205 INCHES MAXIMUM IN, outside_diameter: 4.8750 INCHES MINIMUM AND 4.8760 INCHES MAXIMUM IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.0600 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 3. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-087-4318, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L217810XX-2-397
NSN: 3110-01-087-4318
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP M50 OVERALL
overall_width0.8125 INCHES MINIMUM AND 0.8205 INCHES MAXIMUM IN
outside_diameter4.8750 INCHES MINIMUM AND 4.8760 INCHES MAXIMUM IN
style_designatorNORMAL ANGLE
backface_corner_radius0.0600 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 3
material_document_and_classificationAMS6490 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN3110-01-087-4318
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L217810XX-2-397 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6490 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 4.8750 INCHES MINIMUM AND 4.8760 INCHES MAXIMUM IN
•
BACKFACE CORNER RADIUS: 0.0600 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 3
•
MATERIAL: STEEL COMP M50 OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6490 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.8125 INCHES MINIMUM AND 0.8205 INCHES MAXIMUM IN
OUTSIDE DIAMETER4.8750 INCHES MINIMUM AND 4.8760 INCHES MAXIMUM IN
BACKFACE CORNER RADIUS0.0600 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 3
MATERIALSTEEL COMP M50 OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
SB3354Reference document
Same NSN cross-reference
Reference document — Secondary reference
A39809Reference document
Same NSN cross-reference
Reference document — Secondary reference
SB3354-201Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy L217810XX-2-397?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L217810XX-2-397?
L217810XX-2-397 is a CUP,TAPERED ROLLER BEARING.
What parts can replace L217810XX-2-397?
There are 3 known substitutes for L217810XX-2-397: SB3354, A39809, SB3354-201. Substitute compatibility should be verified for your specific system.
What is the NSN for L217810XX-2-397?
L217810XX-2-397 is cataloged in the U.S. Government catalog under NSN 3110-01-087-4318. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L217810XX-2-397