PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L217-17
L217-17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, housing_bore_diameter: 2.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2097, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L217-17
NSN: 5330-00-641-2097
FSC: 5330
CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
housing_bore_diameter2.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-641-2097
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L217-17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 2.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
CASE STYLESQUARE
MATERIALLEATHER SEALING ELEMENT A
HOUSING BORE DIAMETER2.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
MS24461-48Interchangeable
interchangeable cross-reference
interchangeable
48NBC2060YZP2CInterchangeable
interchangeable cross-reference
interchangeable
48NBC2060YZPInterchangeable
interchangeable cross-reference
interchangeable
32-00364-000Interchangeable
interchangeable cross-reference
interchangeable
SS5821H1L5Interchangeable
interchangeable cross-reference
interchangeable
49611-01X9PC11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy L217-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L217-17?
L217-17 is a SEAL,PLAIN ENCASED.
What parts can replace L217-17?
There are 19 known substitutes for L217-17: MS24461-48, 48NBC2060YZP2C, 48NBC2060YZP and 16 more. Substitute compatibility should be verified for your specific system.
Is L217-17 still available?
L217-17 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L217-17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026