PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L2-12
L2-12 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include width: 0.312 INCHES NOMINAL IN, height: 0.126 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, length: 0.375 INCHES NOMINAL IN, material: STEEL COMP 416, bore_shape: STRAIGHT, bore_diameter: 60.00 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L2-12
NSN: 3110-00-156-5106
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
width0.312 INCHES NOMINAL IN
height0.126 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
length0.375 INCHES NOMINAL IN
materialSTEEL COMP 416
bore_shapeSTRAIGHT
bore_diameter60.00 MILLIMETERS NOMINAL MM
hole_diameter0.128 INCHES NOMINAL IN
overall_width22.0 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNING
load_directionANGULAR
lubricant_typeUNIVERSAL
surface_finishGROUND
NSN3110-00-156-5106
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L2-12 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 60.00 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
NONDEFINITIVE SPEC/STD DATA: 123 TYPE AND 00 GRADE
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER60.00 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
NONDEFINITIVE SPEC/STD DATA123 TYPE AND 00 GRADE
STYLE DESIGNATORNON-SEPARABLE
BORE SHAPESTRAIGHT
MATERIALSTEEL OVERALL
LOAD DIRECTIONANGULAR
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
U-570Interchangeable
interchangeable cross-reference
interchangeable
U160Interchangeable
interchangeable cross-reference
interchangeable
F57Interchangeable
interchangeable cross-reference
interchangeable
V318MInterchangeable
interchangeable cross-reference
interchangeable
76Interchangeable
interchangeable cross-reference
interchangeable
L2-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L2-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L2-12?
L2-12 is a BEARING,BALL,ANNULAR.
What parts can replace L2-12?
There are 20 known substitutes for L2-12: U-570, U160, F57 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L2-12?
L2-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L2-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026