PartsTable
Technical Data Sheet
Download PDF

L1700234-007 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L1700234-007: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 1.190 INCHES NOMINAL IN, overall_length: 1.940 INCHES NOMINAL IN, style_designator: ANCHOR, material_thickness: 0.140 INCHES NOMINAL IN, mounting_hole_diameter: 0.210 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-706-0685, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L1700234-007
NSN: 5340-01-706-0685
FSC: 5340 — Hardware, Commercial
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width1.190 INCHES NOMINAL IN
overall_length1.940 INCHES NOMINAL IN
style_designatorANCHOR
material_thickness0.140 INCHES NOMINAL IN
mounting_hole_diameter0.210 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
end_item_identificationB1-BACFT
material_document_and_classificationAMS 5520 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyRETAINER, ECCENTRIC
center_to_center_distance_between_cup_and_mounting_hole0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
NSN5340-01-706-0685
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L1700234-007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5520 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.210 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.140 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE: 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORANCHOR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5520 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.210 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OVERALL LENGTH1.940 INCHES NOMINAL IN
OVERALL WIDTH1.190 INCHES NOMINAL IN
MATERIAL THICKNESS0.140 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYRETAINER, ECCENTRIC
END ITEM IDENTIFICATIONB1-BACFT
MATERIALSTEEL CORROSION RESISTING
SUBSTITUTES & CROSS-REFERENCES 1
L1700234Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy L1700234-007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L1700234-007?
L1700234-007 is a RETAINER,NUT AND BOLT.
What parts can replace L1700234-007?
There is 1 known substitute for L1700234-007: L1700234. Substitute compatibility should be verified for your specific system.
What is the NSN for L1700234-007?
L1700234-007 is cataloged in the U.S. Government catalog under NSN 5340-01-706-0685. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L1700234-007

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.