PartsTable
Technical Data Sheet
Download PDF

L1700234-005 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L1700234-005: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 632, overall_width: 1.100 INCHES NOMINAL IN, overall_height: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, overall_length: 1.650 INCHES NOMINAL IN, special_features: FURNISHED W/ 21 TEETH, material_thickness: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-175-2146, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L1700234-005
NSN: 5340-01-175-2146
FSC: 5340 — Hardware, Commercial
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
materialSTEEL COMP 632
overall_width1.100 INCHES NOMINAL IN
overall_height0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
overall_length1.650 INCHES NOMINAL IN
special_featuresFURNISHED W/ 21 TEETH
material_thickness0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
mounting_hole_diameter0.210 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
material_document_and_classificationAMS 5520 ASSN STD SINGLE MATERIAL RESPONSE
center_to_center_distance_between_cup_and_mounting_hole0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
NSN5340-01-175-2146
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L1700234-005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5520 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.210 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE: 0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5520 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.210 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OVERALL LENGTH1.650 INCHES NOMINAL IN
OVERALL WIDTH1.100 INCHES NOMINAL IN
MATERIAL THICKNESS0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
SPECIAL FEATURESFURNISHED W/ 21 TEETH
MATERIALSTEEL COMP 632
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy L1700234-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L1700234-005?
L1700234-005 is a RETAINER,NUT AND BOLT.
What is the NSN for L1700234-005?
L1700234-005 is cataloged in the U.S. Government catalog under NSN 5340-01-175-2146. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L1700234-005

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.