PartsTable / COMPONENT / L1700-1
L1700-1
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 0.676 INCHES NOMINAL IN, center_hole_diameter: 0.316 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8391, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
L1700-1
NSN: 5330-00-285-8391 FSC: 5330 CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
material RUBBER SILICONE CLASS Q OVERALL case_style SQUARE seal_width 0.500 INCHES NOMINAL IN hardness_rating 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL peripheral_diameter 0.676 INCHES NOMINAL IN center_hole_diameter 0.316 INCHES NOMINAL IN housing_bore_diameter 3.000 INCHES NOMINAL IN sealing_element_style ANGULAR cross-sectional_height 0.194 INCHES NOMINAL IN accommodated_shaft_diameter 1.937 INCHES NOMINAL IN cross-sectional_shape_style OVAL accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-285-8391
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: L1700-1
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• MATERIAL: LEATHER SEALING ELEMENT
• SEAL WIDTH: 0.500 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 3.000 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 1.937 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT MATERIAL LEATHER SEALING ELEMENT CASE STYLE SQUARE SEAL WIDTH 0.500 INCHES NOMINAL IN MATERIAL STEEL CASE HOUSING BORE DIAMETER 3.000 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT DIAMETER 1.937 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
1449 Interchangeable interchangeable cross-reference
interchangeable
GA800ED1 Interchangeable interchangeable cross-reference
interchangeable
E106T8 Interchangeable interchangeable cross-reference
interchangeable
50300 Interchangeable interchangeable cross-reference
interchangeable
10120 Interchangeable interchangeable cross-reference
interchangeable
S15294 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy L1700-1?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L1700-1?
L1700-1 is a PACKING,PREFORMED.
What parts can replace L1700-1?
There are 22 known substitutes for L1700-1: 1449, GA800ED1, E106T8 and 19 more. Substitute compatibility should be verified for your specific system.
Is L1700-1 still available?
L1700-1 is currently cancelled.
Request a Quote — L1700-1