PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L1670-10
L1670-10 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: HEXAGON, head_height: 0.234 INCHES NOMINAL IN, thread_class: 2A A, hole_diameter: 0.093 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-281-5137, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L1670-10
NSN: 5306-00-281-5137
FSC: 5306
CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleHEXAGON
head_height0.234 INCHES NOMINAL IN
thread_class2A A
hole_diameter0.093 INCHES NOMINAL IN
hole_quantity1
thread_length1.000 INCHES MINIMUM IN
fastener_length1.266 INCHES NOMINAL IN
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentCADMIUM OVERALL
NSN5306-00-281-5137
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: L1670-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: HEXAGON
•
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HOLE CONFIGURATION STYLE: HEXAGON FLATS
•
THREAD QUANTITY PER INCH: 18
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.234 INCHES NOMINAL IN
•
FEATURES PROVIDED: FINISHED HEAD
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEHEXAGON
WIDTH BETWEEN FLATS0.500 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HOLE CONFIGURATION STYLEHEXAGON FLATS
THREAD QUANTITY PER INCH18
HOLE DIAMETER0.093 INCHES NOMINAL IN
HEAD HEIGHT0.234 INCHES NOMINAL IN
FEATURES PROVIDEDFINISHED HEAD
THREAD LENGTH1.000 INCHES MINIMUM IN
HOLE QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
36396Interchangeable
interchangeable cross-reference
interchangeable
1C108Interchangeable
interchangeable cross-reference
interchangeable
7085127Interchangeable
interchangeable cross-reference
interchangeable
T3840Interchangeable
interchangeable cross-reference
interchangeable
B3A2WInterchangeable
interchangeable cross-reference
interchangeable
715J486PC57Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy L1670-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L1670-10?
L1670-10 is a BOLT,MACHINE.
What parts can replace L1670-10?
There are 22 known substitutes for L1670-10: 36396, 1C108, 7085127 and 19 more. Substitute compatibility should be verified for your specific system.
Is L1670-10 still available?
L1670-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L1670-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026