L12M-RFA — PIN,GROOVED,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

L12M-RFA: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.500 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, overall_length: 2.062 INCHES NOMINAL IN, undercut_width: 0.250 INCHES NOMINAL IN, first_end_style: CHAMFERED, hardness_rating: 52.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-020-6784, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

L12M-RFA

NSN: 5315-01-020-6784
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 06550 — INGERSOLL-RAND CO MATERIAL HANDLING DIV (USA)

SPECIFICATIONS

diameter	0.500 INCHES NOMINAL IN
material	STEEL CORROSION RESISTING OVERALL
overall_length	2.062 INCHES NOMINAL IN
undercut_width	0.250 INCHES NOMINAL IN
first_end_style	CHAMFERED
hardness_rating	52.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL
undercut_radius	0.250 INCHES NOMINAL IN
effective_length	1.625 INCHES NOMINAL IN
special_features	END NOTCHED 1/4 BY 1/4
style_designator	GROOVE
features_provided	CASEHARDENED
undercut_diameter	0.375 INCHES NOMINAL IN
NSN	5315-01-020-6784

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.250 INCHES NOMINAL IN

•

FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 0.375 INCHES NOMINAL IN

•

FIRST END LOCATION: BOTH ENDS

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

FIRST END STYLE: CHAMFERED

•

FIRST HOLE DIAMETER: 0.141 INCHES NOMINAL IN

•

HARDNESS RATING: 52.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.250 INCHES NOMINAL IN
FIRST END TAPER LENGTH	0.062 INCHES NOMINAL IN
UNDERCUT DIAMETER	0.375 INCHES NOMINAL IN
FIRST END LOCATION	BOTH ENDS
HOLE ARRANGEMENT STYLE	ONE END DRILLED
FIRST END STYLE	CHAMFERED
FIRST HOLE DIAMETER	0.141 INCHES NOMINAL IN
HARDNESS RATING	52.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATOR	GROOVE
DIAMETER	0.500 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

290Reference document

Same NSN cross-reference

Reference document — Secondary reference

L12MReference document

Same NSN cross-reference

Reference document — Secondary reference

290-BReference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy L12M-RFA?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is L12M-RFA?

L12M-RFA is a PIN,GROOVED,HEADLESS.

What parts can replace L12M-RFA?

There are 3 known substitutes for L12M-RFA: 290, L12M, 290-B. Substitute compatibility should be verified for your specific system.

What is the NSN for L12M-RFA?

L12M-RFA is cataloged in the U.S. Government catalog under NSN 5315-01-020-6784. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

L12M-RFA — PIN,GROOVED,HEADLESS

Request a Quote — L12M-RFA