PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L1223-60-2-014
L1223-60-2-014 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ OVERALL, temp_rating: -100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, center_hole_diameter: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-194-3448, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L1223-60-2-014
NSN: 5330-00-194-3448
FSC: 5330
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ OVERALL
temp_rating-100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
center_hole_diameter0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
material_document_and_classificationMIL-R-25988 TY1,CL 1,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-194-3448
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L1223-60-2-014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
TEMP RATING: -100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25988 TY1,CL 1,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER HOLE DIAMETER: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
TEMP RATING-100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEO-RING
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIALRUBBER FLUOROSILICONE CLASS FQ OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-25988 TY1,CL 1,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE DIAMETER0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
QQ-S-781 CL1TY1FNBGR2HDInterchangeable
interchangeable cross-reference
interchangeable
ASTM-D3953Interchangeable
interchangeable cross-reference
interchangeable
ASTM D3953-97Interchangeable
interchangeable cross-reference
interchangeable
2-14L449-6Interchangeable
interchangeable cross-reference
interchangeable
953519-14Interchangeable
interchangeable cross-reference
interchangeable
945-013Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy L1223-60-2-014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L1223-60-2-014?
L1223-60-2-014 is a PACKING,PREFORMED.
What parts can replace L1223-60-2-014?
There are 15 known substitutes for L1223-60-2-014: QQ-S-781 CL1TY1FNBGR2HD, ASTM-D3953, ASTM D3953-97 and 12 more. Substitute compatibility should be verified for your specific system.
Is L1223-60-2-014 still available?
L1223-60-2-014 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L1223-60-2-014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026