PartsTable
Technical Data Sheet
Download PDF

L1223 2-024 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L1223 2-024: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-400-0010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L1223 2-024
NSN: 5331-00-400-0010
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-400-0010
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L1223 2-024 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 6
8900630P54Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-024 L1223-60Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-024-L737-65Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-25988Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-024 LM152-60Reference document
Same NSN cross-reference
Reference document — Secondary reference
8900630P054Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L1223 2-024?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L1223 2-024?
L1223 2-024 is a O-RING.
What parts can replace L1223 2-024?
There are 6 known substitutes for L1223 2-024: 8900630P54, 2-024 L1223-60, 2-024-L737-65 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L1223 2-024?
L1223 2-024 is cataloged in the U.S. Government catalog under NSN 5331-00-400-0010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L1223 2-024