PartsTable
Technical Data Sheet
Download PDF

L116110-2-397 — CUP,TAPERED ROLLER BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

L116110-2-397: CUP,TAPERED ROLLER BEARING.

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, overall_width: 0.6560 INCHES MINIMUM AND 0.6563 INCHES MAXIMUM IN, outside_diameter: 4.5625 INCHES MINIMUM AND 4.5630 INCHES MAXIMUM IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.0620 INCHES MINIMUM AND 0.0621 INCHES MAXIMUM IN, standard_tolerance_designation: AFBMA CLASS 2. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-943-5164, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L116110-2-397
NSN: 3110-00-943-5164
NIINs: 009435164, 010535075
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.6560 INCHES MINIMUM AND 0.6563 INCHES MAXIMUM IN
outside_diameter4.5625 INCHES MINIMUM AND 4.5630 INCHES MAXIMUM IN
style_designatorNORMAL ANGLE
backface_corner_radius0.0620 INCHES MINIMUM AND 0.0621 INCHES MAXIMUM IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-943-5164
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L116110-2-397 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 4.5625 INCHES MINIMUM AND 4.5635 INCHES MAXIMUM IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH0.6563 INCHES NOMINAL IN
OUTSIDE DIAMETER4.5625 INCHES MINIMUM AND 4.5635 INCHES MAXIMUM IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
SB3307B1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L116110-2-397?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L116110-2-397?
L116110-2-397 is a CUP,TAPERED ROLLER BEARING.
What parts can replace L116110-2-397?
There is 1 known substitute for L116110-2-397: SB3307B1. Substitute compatibility should be verified for your specific system.
What is the NSN for L116110-2-397?
L116110-2-397 is cataloged in the U.S. Government catalog under NSN 3110-00-943-5164. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L116110-2-397