L103477 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

L103477: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1045 OVERALL, first_end_style: CHAMFERED, second_end_style: SQUARE, special_features: FIRST HOLE LOCATED 0.500 IN. NOM FROM SQUARE END IN, pin_overall_length: 4.700 INCHES NOMINAL IN, first_hole_diameter: 0.247 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-101-8216, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

L103477

NSN: 5315-01-101-8216
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)

SPECIFICATIONS

material	STEEL COMP 1045 OVERALL
first_end_style	CHAMFERED
second_end_style	SQUARE
special_features	FIRST HOLE LOCATED 0.500 IN. NOM FROM SQUARE END IN
pin_overall_length	4.700 INCHES NOMINAL IN
first_hole_diameter	0.247 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
pin_overall_diameter	1.1220 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
second_hole_diameter	0.310 INCHES NOMINAL IN
first_end_taper_angle	15.0 DEGREES NOMINAL
first_end_taper_length	0.320 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
hole_arrangement_style	BOTH END DRILLED
second_end_relationship_with_first_end	NOT IDENTICAL
NSN	5315-01-101-8216

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST END TAPER LENGTH: 0.320 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN

•

HOLE ARRANGEMENT STYLE: BOTH END DRILLED

•

FIRST END STYLE: CHAMFERED

•

FIRST HOLE DIAMETER: 0.247 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN

•

FIRST END TAPER ANGLE: 15.0 DEGREES NOMINAL

•

PIN OVERALL DIAMETER: 1.1220 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN

•

PIN OVERALL LENGTH: 4.700 INCHES NOMINAL IN

•

SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL

TECHNICAL CHARACTERISTICS

FIRST END TAPER LENGTH	0.320 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLE	BOTH END DRILLED
FIRST END STYLE	CHAMFERED
FIRST HOLE DIAMETER	0.247 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
FIRST END TAPER ANGLE	15.0 DEGREES NOMINAL
PIN OVERALL DIAMETER	1.1220 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
PIN OVERALL LENGTH	4.700 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
SECOND HOLE DIAMETER	0.310 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES	3.190 INCHES MINIMUM AND 3.310 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

818-L103477Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy L103477?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is L103477?

L103477 is a PIN,STRAIGHT,HEADLESS.

What parts can replace L103477?

There is 1 known substitute for L103477: 818-L103477. Substitute compatibility should be verified for your specific system.

What is the NSN for L103477?

L103477 is cataloged in the U.S. Government catalog under NSN 5315-01-101-8216. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

L103477 — PIN,STRAIGHT,HEADLESS

Request a Quote — L103477