PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L102604
L102604 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8617H OVERALL, first_end_style: SQUARE, hardness_rating: 85.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 88.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL, features_provided: CASEHARDENED, pin_overall_length: 1.080 INCHES NOMINAL IN, first_hole_diameter: 0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-102-1949, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L102604
NSN: 5315-01-102-1949
FSC: 5315
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL COMP 8617H OVERALL
first_end_styleSQUARE
hardness_rating85.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 88.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
features_providedCASEHARDENED
pin_overall_length1.080 INCHES NOMINAL IN
first_hole_diameter0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
pin_overall_diameter0.2330 INCHES MINIMUM AND 0.2340 INCHES MAXIMUM IN
second_hole_diameter0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
hole_arrangement_styleBOTH END DRILLED
material_document_and_classificationMS450 8617H,FSCM 10988 MFR REF SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes0.760 INCHES NOMINAL IN
NSN5315-01-102-1949
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: L102604 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 1.080 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MS450 8617H,FSCM 10988 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 8617H OVERALL
•
SECOND HOLE DIAMETER: 0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.160 INCHES NOMINAL IN
•
HARDNESS RATING: 85.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 88.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH1.080 INCHES NOMINAL IN
FIRST END STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONMS450 8617H,FSCM 10988 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 8617H OVERALL
SECOND HOLE DIAMETER0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.160 INCHES NOMINAL IN
HARDNESS RATING85.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 88.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
CENTER TO CENTER DISTANCE BETWEEN HOLES0.760 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
1250-0005Interchangeable
interchangeable cross-reference
interchangeable
028-33Interchangeable
interchangeable cross-reference
interchangeable
028-23Interchangeable
interchangeable cross-reference
interchangeable
503-041C4-0-30Interchangeable
interchangeable cross-reference
interchangeable
TS2AN500-4-30Interchangeable
interchangeable cross-reference
interchangeable
03003070Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L102604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L102604?
L102604 is a PIN,STRAIGHT,HEADLESS.
What parts can replace L102604?
There are 6 known substitutes for L102604: 1250-0005, 028-33, 028-23 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L102604?
L102604 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-102-1949. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L102604

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026