PartsTable
Technical Data Sheet
PartsTable / MRO / L1026
L1026 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COUPLING HALF,QUICK DISCONNECT is a the manufacturer industrial component. Key specifications include material: STEEL BODY, leg_length: 0.375 INCHES NOMINAL IN, seat_angle: 37.0 DEGREES, thread_class: 3A ALL ENDS A, overall_length: 1.125 INCHES NOMINAL IN, connection_type: THREADED EXTERNAL TUBE FIRST FLUID END CONNECTION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-229-9287, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ L1026
NSN: 5340-00-229-9287
FSC: 5340
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL BODY
leg_length0.375 INCHES NOMINAL IN
seat_angle37.0 DEGREES
thread_class3A ALL ENDS A
overall_length1.125 INCHES NOMINAL IN
connection_typeTHREADED EXTERNAL TUBE FIRST FLUID END CONNECTION
connection_styleFLARED ALL ENDS
style_designatorMALE COUPLING HALF
features_providedSELF-SEALING
surface_treatmentPASSIVATE BODY
nominal_thread_size0.562 INCHES ALL ENDS IN
end_item_identificationCLOSE IN WEAPON SYSTEM (CIWS-PHALANX)
NSN5340-00-229-9287
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L1026 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
7M7318Interchangeable
interchangeable cross-reference
interchangeable
H960012-002BInterchangeable
interchangeable cross-reference
interchangeable
26890Interchangeable
interchangeable cross-reference
interchangeable
L-1026Interchangeable
interchangeable cross-reference
interchangeable
5189586Interchangeable
interchangeable cross-reference
interchangeable
4730PL0976167Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L1026?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L1026?
L1026 is a COUPLING HALF,QUICK DISCONNECT. It is classified as a MRO (MRO_GENERAL).
What parts can replace L1026?
There are 8 known substitutes for L1026: 7M7318, H960012-002B, 26890 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L1026?
L1026 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-229-9287. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L1026

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026