PartsTable
Technical Data Sheet
Download PDF

L10074-3-27 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

L10074-3-27: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1860 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM IN, head_diameter: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-304-9451, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L10074-3-27
NSN: 5305-01-304-9451
FSC: 5305 — Screws
CAGE: 62384 — LFC INDUSTRIES, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1860 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM IN
head_diameter0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
thread_length0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
fastener_length1.948 INCHES MINIMUM AND 1.995 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5305-01-304-9451
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: L10074-3-27 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.948 INCHES MINIMUM AND 1.995 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.948 INCHES MINIMUM AND 1.995 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN
GRIP DIAMETER0.1860 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
S10074-3-27Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L10074-3-27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L10074-3-27?
L10074-3-27 is a SCREW,CLOSE TOLERANCE.
What parts can replace L10074-3-27?
There is 1 known substitute for L10074-3-27: S10074-3-27. Substitute compatibility should be verified for your specific system.
What is the NSN for L10074-3-27?
L10074-3-27 is cataloged in the U.S. Government catalog under NSN 5305-01-304-9451. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L10074-3-27

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.