PartsTable
Technical Data Sheet
Download PDF

L0449 3-903 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L0449 3-903: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, center_hole_diameter: 0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-143-6604, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L0449 3-903
NSN: 5331-01-143-6604
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
center_hole_diameter0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
NSN5331-01-143-6604
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L0449 3-903 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 3
287-6008P131Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-003L449-65Reference document
Same NSN cross-reference
Reference document — Secondary reference
3-003L449-65Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy L0449 3-903?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L0449 3-903?
L0449 3-903 is a O-RING.
What parts can replace L0449 3-903?
There are 3 known substitutes for L0449 3-903: 287-6008P131, 2-003L449-65, 3-003L449-65. Substitute compatibility should be verified for your specific system.
What is the NSN for L0449 3-903?
L0449 3-903 is cataloged in the U.S. Government catalog under NSN 5331-01-143-6604. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L0449 3-903