PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L04213
L04213 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,BARREL is a the manufacturer industrial component. Key specifications include width: 1.313 INCHES NOMINAL PLATE IN, length: 3.000 INCHES NOMINAL PLATE IN, diameter: 0.375 INCHES NOMINAL BAR IN, strike_type: SURFACE, special_features: WEIGHT:2.750 LBS PER DOZEN;BAR O/A LG:3.000 IN.NOM;MATL:BRASS; LBS, features_provided: SCREW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L04213
NSN: 5340-00-240-2295
FSC: 5340
CAGE: 80204 — AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED DBA AMERICAN NATIONAL STANDARDS INSTITUTE (USA)
SPECIFICATIONS
width1.313 INCHES NOMINAL PLATE IN
length3.000 INCHES NOMINAL PLATE IN
diameter0.375 INCHES NOMINAL BAR IN
strike_typeSURFACE
strike_quantity1
special_featuresWEIGHT:2.750 LBS PER DOZEN;BAR O/A LG:3.000 IN.NOM;MATL:BRASS; LBS
features_providedSCREW
nondefinitive_spec/std_data1011 TYPE
NSN5340-00-240-2295
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L04213 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STRIKE TYPE: SURFACE
•
STRIKE QUANTITY: 1
•
WIDTH: 1.313 INCHES NOMINAL PLATE IN
•
DIAMETER: 0.375 INCHES NOMINAL BAR IN
•
FEATURES PROVIDED: SCREW
•
NONDEFINITIVE SPEC/STD DATA: 1011 TYPE
•
LENGTH: 3.000 INCHES NOMINAL PLATE IN
TECHNICAL CHARACTERISTICS (FLIS)
STRIKE TYPESURFACE
STRIKE QUANTITY1
WIDTH1.313 INCHES NOMINAL PLATE IN
SPECIAL FEATURESWEIGHT:2.750 LBS PER DOZEN;BAR O/A LG:3.000 IN.NOM;MATL:BRASS; LBS
DIAMETER0.375 INCHES NOMINAL BAR IN
FEATURES PROVIDEDSCREW
NONDEFINITIVE SPEC/STD DATA1011 TYPE
LENGTH3.000 INCHES NOMINAL PLATE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1923Upgraded Successor
successor cross-reference
successor
125213Interchangeable
interchangeable cross-reference
interchangeable
125213CInterchangeable
interchangeable cross-reference
interchangeable
100105-2Interchangeable
interchangeable cross-reference
interchangeable
7058773P3Interchangeable
interchangeable cross-reference
interchangeable
3-16STAINLESSSTEELBALLGRADE1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L04213?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L04213?
L04213 is a BOLT,BARREL.
What parts can replace L04213?
There are 15 known substitutes for L04213: 1923, 125213, 125213C and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L04213?
L04213 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2295. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L04213

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026