PartsTable
Technical Data Sheet
Download PDF

L01814 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

L01814: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 2.000 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, bearing_type: SLEEVE SHAFT, shaft_length: 0.810 INCHES NOMINAL IN, shaft_runout: 0.0005 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-005-1489, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ L01814
NSN: 5905-01-005-1489
FSC: 5905 — Resistor
CAGE: 16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length2.000 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
bearing_typeSLEEVE SHAFT
shaft_length0.810 INCHES NOMINAL IN
shaft_runout0.0005 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter1.810 INCHES NOMINAL IN
lateral_runout0.003 INCHES IN
overall_length2.810 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
shaft_end_play0.005 INCHES IN
NSN5905-01-005-1489
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN L01814 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 3.00 INCH-OUNCES IN
•
NONTURN DEVICE LOCATION: AT 6 OCLOCK
•
BODY DIAMETER: 1.810 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
LATERAL RUNOUT: 0.003 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 500.0 OHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 85.0 SINGLE SECTION
•
SECTION QUANTITY: 1
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE3.00 INCH-OUNCES IN
NONTURN DEVICE LOCATIONAT 6 OCLOCK
BODY DIAMETER1.810 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
LATERAL RUNOUT0.003 INCHES IN
ELECTRICAL RESISTANCE PER SECTION500.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.562 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
KBT338BReference document
Same NSN cross-reference
Reference document — Design control — primary reference
AR500L.25Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy L01814?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L01814?
L01814 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace L01814?
There are 2 known substitutes for L01814: KBT338B, AR500L.25. Substitute compatibility should be verified for your specific system.
What is the NSN for L01814?
L01814 is cataloged in the U.S. Government catalog under NSN 5905-01-005-1489. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L01814

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.