PartsTable
Technical Data Sheet
Download PDF

L-673744-SHT3-ITEM 17 — CLAMP ASSEMBLY,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

L-673744-SHT3-ITEM 17: CLAMP ASSEMBLY,RETAINING.

The CLAMP ASSEMBLY,RETAINING is a the manufacturer industrial component. Key specifications include end_item_identification: FIRE SYS HALON 1301, criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-353-6280, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L-673744-SHT3-ITEM 17
NSN: 5340-01-353-6280
FSC: 5340 — Hardware, Commercial
CAGE: 0KDP7 — KIDDE-FENWAL, LLC (USA)
SPECIFICATIONS
end_item_identificationFIRE SYS HALON 1301
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsMAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
NSN5340-01-353-6280
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L-673744-SHT3-ITEM 17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
TECHNICAL CHARACTERISTICS
CRITICALITY CODE JUSTIFICATIONZZZY
END ITEM IDENTIFICATIONFIRE SYS HALON 1301
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
264491-75Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
L-673744-SHT3-ITEM 17VMSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
264491-75VMSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy L-673744-SHT3-ITEM 17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L-673744-SHT3-ITEM 17?
L-673744-SHT3-ITEM 17 is a CLAMP ASSEMBLY,RETAINING.
What parts can replace L-673744-SHT3-ITEM 17?
There are 3 known substitutes for L-673744-SHT3-ITEM 17: 264491-75, L-673744-SHT3-ITEM 17VM, 264491-75VM. Substitute compatibility should be verified for your specific system.
What is the NSN for L-673744-SHT3-ITEM 17?
L-673744-SHT3-ITEM 17 is cataloged in the U.S. Government catalog under NSN 5340-01-353-6280. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L-673744-SHT3-ITEM 17