PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L-48412
L-48412 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL HOUSING, bore_diameter: 0.7505 INCHES MINIMUM AND 0.7515 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, housing_length: 0.8125 INCHES NOMINAL IN, shaft_end_type: OPEN, flange_thickness: 0.0625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3130-01-095-6559, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L-48412
NSN: 3130-01-095-6559
FSC: 3130
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL HOUSING
bore_diameter0.7505 INCHES MINIMUM AND 0.7515 INCHES MAXIMUM IN
alignment_typeSELF-ALIGNING
housing_length0.8125 INCHES NOMINAL IN
shaft_end_typeOPEN
flange_thickness0.0625 INCHES NOMINAL IN
housing_diameter1.5000 INCHES NOMINAL IN
style_designatorFLANGE BLOCK
mounting_hole_typeROUND, UNTHREADED
bolt_circle_diameter2.2500 INCHES NOMINAL IN
load_capability_typeRADIAL AND THRUST
lubrication_materialOIL
NSN3130-01-095-6559
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: L-48412 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD CAPABILITY TYPE: RADIAL AND THRUST
•
OVERALL OUTSIDE DIAMETER: 3.0000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLANGE BLOCK
•
MATERIAL: IRON BEARING
•
HOUSING DIAMETER: 1.5000 INCHES NOMINAL IN
•
BORE DIAMETER: 0.7505 INCHES MINIMUM AND 0.7515 INCHES MAXIMUM IN
•
SHAFT END TYPE: OPEN
TECHNICAL CHARACTERISTICS (FLIS)
LOAD CAPABILITY TYPERADIAL AND THRUST
OVERALL OUTSIDE DIAMETER3.0000 INCHES NOMINAL IN
STYLE DESIGNATORFLANGE BLOCK
MATERIALIRON BEARING
MATERIALSTEEL HOUSING
HOUSING DIAMETER1.5000 INCHES NOMINAL IN
BORE DIAMETER0.7505 INCHES MINIMUM AND 0.7515 INCHES MAXIMUM IN
SHAFT END TYPEOPEN
BOLT CIRCLE DIAMETER2.2500 INCHES NOMINAL IN
ALIGNMENT TYPESELF-ALIGNING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
X344Interchangeable
interchangeable cross-reference
interchangeable
186363-5Interchangeable
interchangeable cross-reference
interchangeable
RB4631-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L-48412?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L-48412?
L-48412 is a BEARING,BALL,ANNULAR.
What parts can replace L-48412?
There are 3 known substitutes for L-48412: X344, 186363-5, RB4631-3. Substitute compatibility should be verified for your specific system.
What is the NSN for L-48412?
L-48412 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3130-01-095-6559. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L-48412

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026