PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L-22-CP-0010-D-10
L-22-CP-0010-D-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL NUT, overall_width: 1.720 INCHES MAXIMUM IN, special_features: FASTENING DEVICE TYPE - PIN; LENGTH OF PIN - 3.200 INCH MAX; LENGTH OF CLAMP - 2.550 INCH MAX IN, style_designator: SINGLE LOOP, surface_treatment: PHOSPHATE ZINC OVERALL, end_item_identification: BISON WHEELED APC, GENERAL MOTORS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-472-2230, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L-22-CP-0010-D-10
NSN: 5340-01-472-2230
FSC: 5340
CAGE: 1F337 — THK RHYTHM AUTOMOTIVE MICHIGAN CORP DIV THK RHYTHM AUTOMOTIVE MICHIGAN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL NUT
overall_width1.720 INCHES MAXIMUM IN
special_featuresFASTENING DEVICE TYPE - PIN; LENGTH OF PIN - 3.200 INCH MAX; LENGTH OF CLAMP - 2.550 INCH MAX IN
style_designatorSINGLE LOOP
surface_treatmentPHOSPHATE ZINC OVERALL
end_item_identificationBISON WHEELED APC, GENERAL MOTORS
material_document_and_classificationASTM A563 GRADE B ASSN STD SINGLE MATERIAL RESPONSE BOLT
NSN5340-01-472-2230
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L-22-CP-0010-D-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PHOSPHATE ZINC OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 5 ASSN STD SINGLE MATERIAL RESPONSE NUT
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: STEEL NUT
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPHOSPHATE ZINC OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 GRADE 5 ASSN STD SINGLE MATERIAL RESPONSE NUT
STYLE DESIGNATORSINGLE LOOP
MATERIALSTEEL NUT
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J403 GRADE 1012 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A563 GRADE B ASSN STD SINGLE MATERIAL RESPONSE BOLT
OVERALL WIDTH1.720 INCHES MAXIMUM IN
SPECIAL FEATURESFASTENING DEVICE TYPE - PIN; LENGTH OF PIN - 3.200 INCH MAX; LENGTH OF CLAMP - 2.550 INCH MAX IN
END ITEM IDENTIFICATIONBISON WHEELED APC, GENERAL MOTORS
MATERIALSTEEL BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
1064021-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L-22-CP-0010-D-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L-22-CP-0010-D-10?
L-22-CP-0010-D-10 is a CLAMP,LOOP.
What parts can replace L-22-CP-0010-D-10?
There is 1 known substitute for L-22-CP-0010-D-10: 1064021-1. Substitute compatibility should be verified for your specific system.
What is the NSN for L-22-CP-0010-D-10?
L-22-CP-0010-D-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-472-2230. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L-22-CP-0010-D-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026