PartsTable / COMPONENT / L-1700-11
L-1700-11
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, outside_diameter: 3.256 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.251 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-290-0324, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
L-1700-11
NSN: 5330-00-290-0324 FSC: 5330 CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.500 INCHES NOMINAL IN outside_diameter 3.256 INCHES NOMINAL IN surface_treatment PLASTIC CASE housing_bore_diameter 3.251 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 2.125 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-290-0324
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: L-1700-11
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ACCOMMODATED SHAFT DIAMETER: 2.125 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• HOUSING BORE DIAMETER: 3.251 INCHES NOMINAL IN
• OUTSIDE DIAMETER: 3.256 INCHES NOMINAL IN
• SEAL WIDTH: 0.500 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER 2.125 INCHES NOMINAL IN CASE STYLE SQUARE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT MATERIAL STEEL CASE HOUSING BORE DIAMETER 3.251 INCHES NOMINAL IN OUTSIDE DIAMETER 3.256 INCHES NOMINAL IN SEAL WIDTH 0.500 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR MATERIAL RUBBER SYNTHETIC SEALING ELEMENT SURFACE TREATMENT PLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
32524M1 Interchangeable interchangeable cross-reference
interchangeable
21302 Interchangeable interchangeable cross-reference
interchangeable
51 Interchangeable interchangeable cross-reference
interchangeable
M1585 Interchangeable interchangeable cross-reference
interchangeable
91605PC175 Interchangeable interchangeable cross-reference
interchangeable
N1072PCM1585 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy L-1700-11?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L-1700-11?
L-1700-11 is a SEAL,PLAIN ENCASED.
What parts can replace L-1700-11?
There are 17 known substitutes for L-1700-11: 32524M1, 21302, 51 and 14 more. Substitute compatibility should be verified for your specific system.
Is L-1700-11 still available?
L-1700-11 is currently cancelled.
Request a Quote — L-1700-11