PartsTable
Technical Data Sheet
Download PDF

KU36657 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

KU36657: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, overall_height: 0.156 INCHES MINIMUM AND 0.173 INCHES MAXIMUM IN, overall_length: 1.258 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN, style_designator: ANCHOR, material_thickness: 0.044 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-761-0826, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KU36657
NSN: 5340-00-761-0826
FSC: 5340 — Hardware, Commercial
CAGE: K0680 — ROLLS-ROYCE AIRLINES (GBR)
SPECIFICATIONS
materialSTEEL COMP 410
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
overall_height0.156 INCHES MINIMUM AND 0.173 INCHES MAXIMUM IN
overall_length1.258 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN
style_designatorANCHOR
material_thickness0.044 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
mounting_hole_diameter0.098 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
width_between_cup_flats0.315 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
material_document_and_classificationAMS 5504, COMP SAE 51410 ASSN STD SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
center_to_center_distance_between_cup_and_mounting_hole0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
NSN5340-00-761-0826
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: KU36657 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5504, COMP SAE 51410 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.044 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.156 INCHES MINIMUM AND 0.173 INCHES MAXIMUM IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
STYLE DESIGNATORANCHOR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5504, COMP SAE 51410 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
OVERALL LENGTH1.258 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.044 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
MATERIALSTEEL COMP 410
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy KU36657?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KU36657?
KU36657 is a RETAINER,NUT AND BOLT.
What is the NSN for KU36657?
KU36657 is cataloged in the U.S. Government catalog under NSN 5340-00-761-0826. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KU36657

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.