PartsTable
Technical Data Sheet
Download PDF

KT-3199 ITEM 3 — FILTER,FLUID

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

KT-3199 ITEM 3: FILTER,FLUID.

The FILTER,FLUID is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 SEDIMENT BOWL, body_width: 3.500 INCHES NOMINAL IN, body_height: 6.000 INCHES NOMINAL IN, body_length: 3.500 INCHES NOMINAL IN, design_type: REUSABLE, mounting_type: UNTHREADED HOLE TOP. This part is cataloged in the U.S.

Government catalog under NSN 4330-01-098-6858, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KT-3199 ITEM 3
NSN: 4330-01-098-6858
FSC: 4330 — Centrifugals, Separators, and Pressure and Vacuum Filters
CAGE: 25573 — ENTWISTLE CO THE KENETT HYDRAULIC SYSTEMS DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 303 SEDIMENT BOWL
body_width3.500 INCHES NOMINAL IN
body_height6.000 INCHES NOMINAL IN
body_length3.500 INCHES NOMINAL IN
design_typeREUSABLE
mounting_typeUNTHREADED HOLE TOP
special_featuresSQ SHP HEAD
style_designatorHIGH PRESSURE THREADED BODY
surface_treatmentANODIZE BODY
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
filtering_media_designPLEATED SINGLE FILTERING MEDIA RESPONSE
mounting_hole_diameter0.390 INCHES NOMINAL IN
NSN4330-01-098-6858
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available FILTER,FLUID TITLE COMPONENT PN KT-3199 ITEM 3 MFR FILTER,FLUID
KEY FEATURES
•
FILTERING MEDIA DESIGN: PLEATED SINGLE FILTERING MEDIA RESPONSE
•
MOUNTING HOLE QUANTITY: 4
•
FILTRATION RATING IN MICRONS: 20.0 NOMINAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2/1 MIL SPEC SINGLE TREATMENT RESPONSE BODY
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.750 INCHES NOMINAL IN
•
DESIGN TYPE: REUSABLE
•
BODY WIDTH: 3.500 INCHES NOMINAL IN
•
BODY HEIGHT: 6.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FILTERING MEDIA DESIGNPLEATED SINGLE FILTERING MEDIA RESPONSE
MOUNTING HOLE QUANTITY4
FILTRATION RATING IN MICRONS20.0 NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2/1 MIL SPEC SINGLE TREATMENT RESPONSE BODY
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.750 INCHES NOMINAL IN
DESIGN TYPEREUSABLE
BODY WIDTH3.500 INCHES NOMINAL IN
BODY HEIGHT6.000 INCHES NOMINAL IN
FIRST INTAKE CONNECTION TYPEUNTHREADED INTERNAL TUBE TOP
STYLE DESIGNATORHIGH PRESSURE THREADED BODY
SUBSTITUTES & CROSS-REFERENCES 1
KT-3197-3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy KT-3199 ITEM 3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KT-3199 ITEM 3?
KT-3199 ITEM 3 is a FILTER,FLUID.
What parts can replace KT-3199 ITEM 3?
There is 1 known substitute for KT-3199 ITEM 3: KT-3197-3. Substitute compatibility should be verified for your specific system.
What is the NSN for KT-3199 ITEM 3?
KT-3199 ITEM 3 is cataloged in the U.S. Government catalog under NSN 4330-01-098-6858. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KT-3199 ITEM 3