PartsTable
Technical Data Sheet
Download PDF

KSP4FS160 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

KSP4FS160: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, load_direction: RADIAL, inner_ring_width: 0.4790 INCHES MINIMUM AND 0.4840 INCHES MAXIMUM IN, outer_ring_width: 0.3300 INCHES MINIMUM AND 0.3350 INCHES MAXIMUM IN, special_features: 10 DEG SELF ALIGNMENT IN EACH DIRECTION. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-927-6915, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KSP4FS160
NSN: 3110-00-927-6915
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 3NPS1 — RBC AIRCRAFT PRODUCTS, INC. (USA)
SPECIFICATIONS
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
seal_quantity2
alignment_typeSELF-ALIGNING
load_directionRADIAL
shield_quantity2
inner_ring_width0.4790 INCHES MINIMUM AND 0.4840 INCHES MAXIMUM IN
outer_ring_width0.3300 INCHES MINIMUM AND 0.3350 INCHES MAXIMUM IN
special_features10 DEG SELF ALIGNMENT IN EACH DIRECTION
style_designatorSINGLE ROW SELF ALIGNING SINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeLIPS TURNED INWARDLY
surface_treatmentCADMIUM OVERALL
lubrication_materialGREASE
NSN3110-00-927-6915
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: KSP4FS160 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: LIPS TURNED INWARDLY
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3300 INCHES MINIMUM AND 0.3350 INCHES MAXIMUM IN
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: SINGLE ROW SELF ALIGNING SINGLE ROW INNER RING EXTENDED BOTH SIDES
•
OVERALL OUTSIDE DIAMETER: 0.9009 INCHES MINIMUM AND 0.9014 INCHES MAXIMUM IN
•
LOAD DIRECTION: RADIAL
•
ALIGNMENT TYPE: SELF-ALIGNING
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPELIPS TURNED INWARDLY
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3300 INCHES MINIMUM AND 0.3350 INCHES MAXIMUM IN
SHIELD QUANTITY2
STYLE DESIGNATORSINGLE ROW SELF ALIGNING SINGLE ROW INNER RING EXTENDED BOTH SIDES
OVERALL OUTSIDE DIAMETER0.9009 INCHES MINIMUM AND 0.9014 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
ALIGNMENT TYPESELF-ALIGNING
SPECIAL FEATURES10 DEG SELF ALIGNMENT IN EACH DIRECTION
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
KSP-4-ZZ MIL-G-23827Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-B-7949Reference document
Same NSN cross-reference
Reference document — Identification reference
MS27261KSP4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy KSP4FS160?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KSP4FS160?
KSP4FS160 is a BEARING,BALL,AIRFRAME.
What parts can replace KSP4FS160?
There are 3 known substitutes for KSP4FS160: KSP-4-ZZ MIL-G-23827, MIL-B-7949, MS27261KSP4. Substitute compatibility should be verified for your specific system.
What is the NSN for KSP4FS160?
KSP4FS160 is cataloged in the U.S. Government catalog under NSN 3110-00-927-6915. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KSP4FS160