PartsTable
Technical Data Sheet
PartsTable / COMPONENT / KS-6
KS-6 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_diameter: 0.3750 INCHES NOMINAL IN, document_type: TECHNICAL MANUAL, alignment_type: SELF-ALIGNING, load_direction: RADIAL, usage_location: EITHER KNEE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-124-2374, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KS-6
NSN: 3110-00-124-2374
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_diameter0.3750 INCHES NOMINAL IN
document_typeTECHNICAL MANUAL
alignment_typeSELF-ALIGNING
load_directionRADIAL
usage_locationEITHER KNEE
document_source80063
shield_quantity2
inner_ring_width0.6200 INCHES NOMINAL IN
outer_ring_width0.4690 INCHES NOMINAL IN
size_designationMEDIUM
special_featuresCOTTON KNIT ELASTIC;SIZE 8;PULLOVER STYLE
NSN3110-00-124-2374
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: KS-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
OUTER RING WIDTH: 0.4690 INCHES NOMINAL IN
•
INNER RING WIDTH: 0.6200 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
ALIGNMENT TYPE: SELF-ALIGNING
•
SHIELD QUANTITY: 2
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
OVERALL OUTSIDE DIAMETER: 1.4375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SELF-ALIGNMENT LOCATIONINTERNAL
OUTER RING WIDTH0.4690 INCHES NOMINAL IN
INNER RING WIDTH0.6200 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
ALIGNMENT TYPESELF-ALIGNING
SHIELD QUANTITY2
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL OUTSIDE DIAMETER1.4375 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE ROW SELF ALIGNING SINGLE ROW INNER RING EXTENDED BOTH SIDES
MATERIALSTEEL CORROSION RESISTING SHIELD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
KSP10FS464Interchangeable
interchangeable cross-reference
interchangeable
AS27645Interchangeable
interchangeable cross-reference
interchangeable
SAE AS27645Interchangeable
interchangeable cross-reference
interchangeable
MS27645-3AInterchangeable
interchangeable cross-reference
interchangeable
KSP3LFS464Interchangeable
interchangeable cross-reference
interchangeable
KSP3LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy KS-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KS-6?
KS-6 is a BEARING,BALL,AIRFRAME.
What parts can replace KS-6?
There are 27 known substitutes for KS-6: KSP10FS464, AS27645, SAE AS27645 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for KS-6?
KS-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-124-2374. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KS-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026