PartsTable
Technical Data Sheet
Download PDF

KR20CNG — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

KR20CNG: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OUTER RACE MEMBER, bore_diameter: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, style_designator: WITH INSERT AND/OR LINER WITH STAKING GROOVE, inner_member_width: 1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN, outer_member_width: 0.9370 INCHES MINIMUM AND 0.9470 INCHES MAXIMUM IN, static_radial_load_rating: 105000 POUNDS LBS. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-121-1797, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KR20CNG
NSN: 3120-01-121-1797
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 50632 — KAMATICS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OUTER RACE MEMBER
bore_diameter0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
style_designatorWITH INSERT AND/OR LINER WITH STAKING GROOVE
inner_member_width1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
outer_member_width0.9370 INCHES MINIMUM AND 0.9470 INCHES MAXIMUM IN
static_radial_load_rating105000 POUNDS LBS
outer_member_outside_diameter2.0315 INCHES MINIMUM AND 2.0320 INCHES MAXIMUM IN
NSN3120-01-121-1797
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: KR20CNG · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER MEMBER WIDTH: 1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.9370 INCHES MINIMUM AND 0.9470 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: WITH INSERT AND/OR LINER WITH STAKING GROOVE
•
STATIC RADIAL LOAD RATING: 105000 POUNDS LBS
•
BORE DIAMETER: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
TECHNICAL CHARACTERISTICS
INNER MEMBER WIDTH1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.9370 INCHES MINIMUM AND 0.9470 INCHES MAXIMUM IN
STYLE DESIGNATORWITH INSERT AND/OR LINER WITH STAKING GROOVE
STATIC RADIAL LOAD RATING105000 POUNDS LBS
BORE DIAMETER0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
MATERIALSTEEL COMP 440C INNER MEMBER
MATERIALSTEEL COMP 630 OUTER RACE MEMBER
OUTER MEMBER OUTSIDE DIAMETER2.0315 INCHES MINIMUM AND 2.0320 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
74A410553-2001Reference document
Same NSN cross-reference
Reference document — Secondary reference
KR16-CWGB-04Reference document
Same NSN cross-reference
Reference document — Secondary reference
74A410625-1003Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
03-825-20E-011Reference document
Same NSN cross-reference
Reference document — Secondary reference
10153969Reference document
Same NSN cross-reference
Reference document — Informative reference only
HSP-16TL102Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy KR20CNG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KR20CNG?
KR20CNG is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace KR20CNG?
There are 6 known substitutes for KR20CNG: 74A410553-2001, KR16-CWGB-04, 74A410625-1003 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for KR20CNG?
KR20CNG is cataloged in the U.S. Government catalog under NSN 3120-01-121-1797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KR20CNG