PartsTable
Technical Data Sheet
PartsTable / COMPONENT / KP8FS160
KP8FS160 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 BALL, bore_diameter: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, load_direction: RADIAL, inner_ring_width: 0.6150 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN, outer_ring_width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, style_designator: SINGLE ROW INNER RING EXTENDED BOTH SIDES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-932-5599, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KP8FS160
NSN: 3110-00-932-5599
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 BALL
bore_diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
inner_ring_width0.6150 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
outer_ring_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter1.6870 INCHES MINIMUM AND 1.6875 INCHES MAXIMUM IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
NSN3110-00-932-5599
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: KP8FS160 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
OUTER RING WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
BEARING SEAL TYPE: CONTACT
•
INNER RING WIDTH: 0.6150 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
•
SEAL QUANTITY: 2
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
•
LUBRICATION MATERIAL: GREASE
•
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
OUTER RING WIDTH0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
BEARING SEAL TYPECONTACT
INNER RING WIDTH0.6150 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
SEAL QUANTITY2
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
LUBRICATION MATERIALGREASE
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
AS27640Interchangeable
interchangeable cross-reference
interchangeable
MS27640-8Interchangeable
interchangeable cross-reference
interchangeable
MX1802AUInterchangeable
interchangeable cross-reference
interchangeable
55950Interchangeable
interchangeable cross-reference
interchangeable
REB49343Interchangeable
interchangeable cross-reference
interchangeable
A-A-55538Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy KP8FS160?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KP8FS160?
KP8FS160 is a BEARING,BALL,AIRFRAME.
What parts can replace KP8FS160?
There are 15 known substitutes for KP8FS160: AS27640, MS27640-8, MX1802AU and 12 more. Substitute compatibility should be verified for your specific system.
Is KP8FS160 still available?
KP8FS160 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KP8FS160

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026