KN121L — KN121L

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

KN121L: KN121L.

The KN121L is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, hole_diameter: 0.219 INCHES NOMINAL IN, overall_width: 2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN, overall_length: 2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 2.008 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5999-00-061-7571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ KN121L

NSN: 5999-00-061-7571
FSC: 5999 — Miscellaneous Electrical and Electronic Components
CAGE: 38056 — ASHCROFT INC DBA HEISE (USA)

SPECIFICATIONS

material	UNABLE TO DECODE
hole_diameter	0.219 INCHES NOMINAL IN
overall_width	2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
overall_length	2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
style_designator	NON-CIRCULAR
aperture_diameter	2.008 INCHES NOMINAL IN
bolt_hole_quantity	4
outside_corner_radius	0.250 INCHES NOMINAL IN
cross-sectional_thickness	0.020 INCHES NOMINAL IN
cross-sectional_shape_style	METAL AND SYNTHETIC RUBBER
environmental_protection_material_location	THROUGHOUT RF SHIELDING GASKET
outside_edge_to_bolt_hole_center_distance_along_width	0.254 INCHES NOMINAL IN
NSN	5999-00-061-7571

COMPONENT DIAGRAM

KEY FEATURES

•

ENVIRONMENTAL PROTECTION MATERIAL LOCATION: THROUGHOUT RF SHIELDING GASKET

•

CROSS-SECTIONAL THICKNESS: 0.020 INCHES NOMINAL IN

•

STYLE DESIGNATOR: NON-CIRCULAR

•

CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER

•

APERTURE DIAMETER: 2.008 INCHES NOMINAL IN

•

BOLT HOLE QUANTITY: 4

TECHNICAL CHARACTERISTICS

ENVIRONMENTAL PROTECTION MATERIAL LOCATION	THROUGHOUT RF SHIELDING GASKET
CROSS-SECTIONAL THICKNESS	0.020 INCHES NOMINAL IN
STYLE DESIGNATOR	NON-CIRCULAR
OVERALL LENGTH	2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE	METAL AND SYNTHETIC RUBBER
OVERALL WIDTH	2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
APERTURE DIAMETER	2.008 INCHES NOMINAL IN
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.750 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.750 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

10-40450-32SReference document

Same NSN cross-reference

Reference document — Secondary reference

13030385-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

8438326-11Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy KN121L?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is KN121L?

KN121L is a KN121L. It is classified as a MRO (MRO_GENERAL).

What parts can replace KN121L?

There are 3 known substitutes for KN121L: 10-40450-32S, 13030385-2, 8438326-11. Substitute compatibility should be verified for your specific system.

What is the NSN for KN121L?

KN121L is cataloged in the U.S. Government catalog under NSN 5999-00-061-7571. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

KN121L — KN121L

Request a Quote — KN121L