KMDB10-8 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

KMDB10-8: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include bore_diameter: 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, style_designator: WITH INSERT AND/OR LINER WITH STAKING GROOVE, inner_member_width: 1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN, outer_member_width: 0.6350 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM IN, outer_member_outside_diameter: 1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-090-1585, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

KMDB10-8

NSN: 3120-01-090-1585
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 97613 — SARGENT AEROSPACE & DEFENSE, LLC DBA KAHR BEARINGS (USA)

SPECIFICATIONS

bore_diameter	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
style_designator	WITH INSERT AND/OR LINER WITH STAKING GROOVE
inner_member_width	1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
outer_member_width	0.6350 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM IN
outer_member_outside_diameter	1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
NSN	3120-01-090-1585

COMPONENT DIAGRAM

KEY FEATURES

•

INNER MEMBER WIDTH: 1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN

•

OUTER MEMBER WIDTH: 0.6350 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: WITH INSERT AND/OR LINER WITH STAKING GROOVE

•

TEST DATA DOCUMENT: 78286-SB 5064 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

•

BORE DIAMETER: 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN

•

OUTER MEMBER OUTSIDE DIAMETER: 1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

INNER MEMBER WIDTH	1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
OUTER MEMBER WIDTH	0.6350 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM IN
STYLE DESIGNATOR	WITH INSERT AND/OR LINER WITH STAKING GROOVE
TEST DATA DOCUMENT	78286-SB 5064 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
BORE DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
OUTER MEMBER OUTSIDE DIAMETER	1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

WBS20ATC56-2YReference document

Same NSN cross-reference

Reference document — Secondary reference

SB5064Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy KMDB10-8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is KMDB10-8?

KMDB10-8 is a BEARING,PLAIN,SELF-ALIGNING.

What parts can replace KMDB10-8?

There are 2 known substitutes for KMDB10-8: WBS20ATC56-2Y, SB5064. Substitute compatibility should be verified for your specific system.

What is the NSN for KMDB10-8?

KMDB10-8 is cataloged in the U.S. Government catalog under NSN 3120-01-090-1585. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

KMDB10-8 — BEARING,PLAIN,SELF-ALIGNING

Request a Quote — KMDB10-8