PartsTable
Technical Data Sheet
PartsTable / COMPONENT / KM776-7
KM776-7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.875 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN, special_features: INCLUDES HINGE 0.790 IN.R,AND CAPTIVE STUD IN, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-886-2519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KM776-7
NSN: 5340-00-886-2519
FSC: 5340
CAGE: 71286 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV CAMLOC PRODUCTS (USA)
SPECIFICATIONS
diameter0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING BAND
overall_width0.875 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN
special_featuresINCLUDES HINGE 0.790 IN.R,AND CAPTIVE STUD IN
tongue_hole_typeROUND, UNTHREADED
material_thickness0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
loop_inside_diameter0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.801 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
NSN5340-00-886-2519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: KM776-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.801 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
•
DIAMETER: 0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.801 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
OVERALL WIDTH0.875 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN
DIAMETER0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SPECIAL FEATURESINCLUDES HINGE 0.790 IN.R,AND CAPTIVE STUD IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
5089-25Interchangeable
interchangeable cross-reference
interchangeable
24370Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
629-0001-001Interchangeable
interchangeable cross-reference
interchangeable
22529991Interchangeable
interchangeable cross-reference
interchangeable
22963Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy KM776-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KM776-7?
KM776-7 is a CLAMP,LOOP.
What parts can replace KM776-7?
There are 8 known substitutes for KM776-7: 5089-25, 24370, 00044 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for KM776-7?
KM776-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-886-2519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KM776-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026