PartsTable
Technical Data Sheet
PartsTable / COMPONENT / KH5
KH5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 1.172 INCHES NOMINAL IN, material: LEATHER INTERMEDIATE RING, inside_diameter: 1.500 INCHES NOMINAL IN, outside_diameter: 2.125 INCHES NOMINAL IN, cross-sectional_shape_style: V BOTTOM RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-691-2523, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KH5
NSN: 5330-00-691-2523
FSC: 5330
CAGE: 64114 — LOED CORP THE WAUSAU PRODUCTS DIV (USA)
SPECIFICATIONS
height1.172 INCHES NOMINAL IN
materialLEATHER INTERMEDIATE RING
inside_diameter1.500 INCHES NOMINAL IN
outside_diameter2.125 INCHES NOMINAL IN
intermediate_ring_quantity3
cross-sectional_shape_styleV BOTTOM RING
NSN5330-00-691-2523
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: KH5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: LEATHER TOP RING
•
CROSS-SECTIONAL SHAPE STYLE: V BOTTOM RING
•
INTERMEDIATE RING QUANTITY: 3
•
HEIGHT: 1.172 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.125 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALLEATHER TOP RING
CROSS-SECTIONAL SHAPE STYLEV BOTTOM RING
INTERMEDIATE RING QUANTITY3
HEIGHT1.172 INCHES NOMINAL IN
MATERIALLEATHER BOTTOM RING
OUTSIDE DIAMETER2.125 INCHES NOMINAL IN
INSIDE DIAMETER1.500 INCHES NOMINAL IN
MATERIALLEATHER INTERMEDIATE RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
104GInterchangeable
interchangeable cross-reference
interchangeable
SP-58Interchangeable
interchangeable cross-reference
interchangeable
SP-NGInterchangeable
interchangeable cross-reference
interchangeable
ASK-HCInterchangeable
interchangeable cross-reference
interchangeable
SP60Interchangeable
interchangeable cross-reference
interchangeable
804-825-7600Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy KH5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KH5?
KH5 is a PACKING ASSEMBLY.
What parts can replace KH5?
There are 7 known substitutes for KH5: 104G, SP-58, SP-NG and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for KH5?
KH5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-691-2523. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KH5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026