PartsTable
Technical Data Sheet
Download PDF

KEMET V3 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

KEMET V3: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 19.0 MILLIMETERS NOMINAL MM, overall_length: 58.0 MILLIMETERS NOMINAL MM, lug_hole_diameter: 4.0 MILLIMETERS NOMINAL MM, surface_treatment: ZINC OVERALL, part_name_assigned_by_controlling_agency: CLIP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-693-3672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KEMET V3
NSN: 5340-01-693-3672
FSC: 5340 — Hardware, Commercial
CAGE: 31433 — KEMET ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width19.0 MILLIMETERS NOMINAL MM
overall_length58.0 MILLIMETERS NOMINAL MM
lug_hole_diameter4.0 MILLIMETERS NOMINAL MM
surface_treatmentZINC OVERALL
part_name_assigned_by_controlling_agencyCLIP
center_to_center_distance_between_first_and_second_holes45.0 MILLIMETERS NOMINAL MM
NSN5340-01-693-3672
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: KEMET V3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 4.0 MILLIMETERS NOMINAL MM
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 45.0 MILLIMETERS NOMINAL MM
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER4.0 MILLIMETERS NOMINAL MM
OVERALL LENGTH58.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH19.0 MILLIMETERS NOMINAL MM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES45.0 MILLIMETERS NOMINAL MM
SURFACE TREATMENTZINC OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYCLIP
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy KEMET V3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KEMET V3?
KEMET V3 is a CLAMP,LOOP.
What is the NSN for KEMET V3?
KEMET V3 is cataloged in the U.S. Government catalog under NSN 5340-01-693-3672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KEMET V3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.